Pr. Saad MEKHILEF

Swinburne University of Technology,

Australia

He authored and co-authored more than 500 publications in academic journals and proceedings and five books with more than 40,000 citations, and more than 70 Ph.D. students who graduated under his supervision. He serves as an editorial board member for many top journals, such as IEEE Transactions on Power Electronics, IEEE Open Journal of Industrial Electronics, IET Renewable Power Generation, Journal of Power Electronics, and International Journal of Circuit Theory and Applications.

Prof. Mekhilef has been listed by Thomson Reuters (Clarivate Analytics) as one of the world's Highly Cited (World's Top 1%) engineering researchers. He is actively involved in industrial consultancy for major corporations in the Power Electronics and Renewable Energy projects. His research interests include Power Conversion Techniques, Control of Power Converters, Maximum Power Point Tracking (MPPT), Renewable Energy, and Energy Efficiency.

Pr. Belkacem DRAOUI

Bechar University, Algeria

Professor of engineering Sciences in the Mechanical Engineering Department of Tahri Mohamed Bechar University since 1996.

Keynote: Thermal and Building Physics improve the energy efficiency of thermal comfort. Control and management of the micoclimate in greenhouses. Solar Energy

Professor DRAOUI Belkacem in currently working as a professor in the mechanical engineering sector within the faculty of Technology at Tahri Mohamed Bechar University, Algeria.

He obtained his doctorate in Engineering Sciences. Option: Energetics from the University of Nice Sohia Antipolis, French in 1994.

Pr DRAOUI Belkacem is the author of more than 212 peer-reviewed papers, including 148 papers of quality journals, 04 peerreviewed books chapters and four books.

His articles have attracted more than 2574 citations with an h-index of 24. In addition to teaching and supervising engineers, Magisters, Masters and Doctoral students,

Pr DRAOUI Belkacem supervised 25 doctoral students until the end and supervises currently 04 doctoral students. Since March 2022 to present day:

Member of the National Council for Scientific Research and Technologies. From 2016 to March 2022:

Vice Rector in charge of Development, Prospective and Orientation. From 2009 to 2014:

Vice Dean in charge of Post-graduation and Scientific research. 2011 to 2017:

Director of a Research Laboratory (Energetic in Arid Zones) bringing together 6 teams where I managed a substantial capital between equipment and operation.

I have held several responsibilities, namely quality assurance, national commission for the equivalence of diplomas, expertise in research projects and member of the Scientific Council several times a member of the scientific councils.

Pr. Mosbah ZIDANI

Batna 2 University,

Algeria

Mosbah ZIDANI currently is a Professor in the Faculty of Technology at Batna 2 University.

He is the chief of a research team in the LGEM Laboratory at the University of Biskra.

He is particularly interested in the development and characterization of innovative metallic materials. He was chairman of the scientific committee of the metallurgy department, member of the Scientific Council of the Faculty of Science and Technology and chairman of several doctoral training at the University from Biskra and currently he is a scientific advisor at the MESRS and expert advisor at the Cru-Est. The research axes currently developed are mainly focused on the experimental study of the microstructures, deformation and recrystallization texture of metal alloys by SEM, EBSD, RX and neutron diffraction.

  Pr. Zidani is the author of over forty five (45) international scientific papers (indexed by: Thomson Reuters /Scopus -Elsevier). He has over 140 participation in national and international conferences in the last ten years, which he has presented several national and international plenary conferences as an Invited Speaker. Pr. Zidani has chaired and organized several national and international scientific events and also member of the scientific committee in more than forty (40) national and international scientific events. He is the main Editor of the special issue of journals (DF,DDF and SSP indexed by: Scopus -Elsevier) of the scientific.net house in Switzerland and also associate editor and editorial Board Member in several high level journals (JERA, JNanoR, Journal of Molecular Liquids, JMES....                   indexed by: Web of Science and Scopus-Elsevier).

Prof. ZIDANI has directed and discussed thirteen (13) doctoral theses and more than thirty five (35) master's degree and final projects for engineering students.

Prof. ZIDANI has directed several national research projects (CNEPRU, PNR, PRFU, etc.) with industrial partners, particularly public, in this case: ENICAB-Biskra and TREFISOUD-El Eulma (Sétif), with several national research centers and laboratories: Advanced Technology Development Center (CDTA), Baba Hassan-Algiers (Algeria ), Materials Science and Engineering Laboratory (LSGM),USTHB-Algiers ( Algeria), Center for Scientific and Technical Research in Physico-chemical Analysis (CRAPC), Tipaza (Algeria) and with the following international laboratories and institutions: Laboratory Synthesis, Properties and Modeling of Materials (SP2M), Léon Brillouin Laboratory (LLB) - CEA in France, Bioceramics and Theoretical Atomic laboratory, Department of Physics, Faculty of Science, Firat University-Elazig, Turkey and Functional Nanocomposite/Hybrid, Low Dimentional Functional Material Group,Research Center for Advanced Material, National Research and Innovation Agency (BRIN) Indonesia

Dr. Tahar ABID
Laboratory of Thermodynamics and Surface Treatment of Materials (LTTSTM),

University

of Constantine 1,

Algeria

ABID Tahar is a metallurgical engineer and a doctor in materials science. Member of the laboratory of thermodynamics and surface treatment of materials LTTSTM of the University of Constantine 1, he is mainly interested in the transformation and development of filler materials, electrodes and welding fluxes, innovative metal wires for welding under gas protection, and carbon steel drawn wires. He has held several positions of responsibility as head of the welding products division, head of the hard steels division and head of the technical department within the national company ENTPL.

Currently, his research interests focus mainly on the study of the microstructures and properties of metal wires resulting from the wire-drawing process, the development of new aluminum-based welding electrodes and innovative wires for gas-shielded welding and also on the development and study of AlMgSiCu aluminum alloys intended for the automobile industry.

Dr. Abid is the author of several scientific articles. Also, he has participated in many national and international conferences over the past ten years, at which he has presented some conferences as a guest speaker. As a national collaborator with the University of Biskra, Dr. Abid has participated in the supervision and monitoring of several doctoral students and has directed several master's theses and end-of-study engineering projects. It has also contributed to certain national research projects (PNR, PRFU, etc.) as an industrial partner

Pr. Larbi ZEROUAL

1978-1982 : DES Electrochimie, Université Ferhat Abbas, majeur de ma promotion j’ai obtenu une bourse d’études en France

1982-1985 : Docteur 3^ème cycle en Electrochimie de l’institut polytechnique de Grenoble

1988-1992 : Docteur es-sciences physiques Université Ferhat Abbas

1985-2019 : Enseignant chercheur. (40 publications dans le domaine du stockage de l’énergie notamment les batteries acides au plomb. Plus de 500 citations)

 ABSTRACT :   The different chemistries of lithium-ion batteries and their industrial uses